Raypak Temp-Tracker Instrucciones de operaciones descargar pdf (Pagina 22)

22

MODE 2

(With Default Settings Shown)

ADJUST MENU

(Page 2 of 2)

Item Field Range Description Setting

Au, 0:30 to

9:55 min

S

TAGE DELAY

Select the minimum time delay between

stages.

Note: This setting is only available when

STAGE MODE is set to PId.

Au, 2 to 42°F

(1 to 23°C)

DIFFERENTIAL

Select the boiler dierential.

Note: The automatic setting is only available

when STAGE MODE is set to PId staging.

0 to 10°F

(0 to 6°C)

STAGE DIFFERENTIAL

Select the interstage temperature dierential

between stages for proportional staging.

Note: This setting is only available when

STAGE MODE is set to P.

0:10 to 8:00 min

INTERSTAGE ON DELAY

Select the amount of time that must pass

once a stage has been turned on in order

to allow the next stage to turn on.

Note: This setting is only available when

STAGE MODE is set to P.

0:10 to 4:00 min

INTERSTAGE OFF DELAY

Select the amount of time that must pass

once a stage has been turned o in order

to allow the next stage to turn o.

Note: This setting is only available when

STAGE MODE is set to P.

0:10 to 5:00 min

MINIMUM ON TIME

Select the minimum amount of time that

the stage contact must remain on before it

is allowed to turn o.

Note: This setting is only available when

STAGE MODE is set to P.

0:10 to 5:00 min

MINIMUM OFF TIME

Select the minimum amount of time that

the stage contact must remain o before it

is allowed to turn back on.

Note: This setting is only available when

STAGE MODE is set to P.

OFF, 0:20 to

9:55 min, On

PUMP DELAY

Select the system pump purge time after

shutting o the burner.

°F or °C

TEMPERATURE UNITS

Select to display temperature in degrees

Fahrenheit or in degrees Celsius.

Table H: Adjust Menu, Mode 2 (page 2 of 2)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comentarios a estos manuales

Sin comentarios